From: "Nelson, Brad E." <nelsonbe@ornl.gov>
Date: February 13, 2005 4:43:38 PM EST
To: "Thomas G. Brown" <tbrown@pppl.gov>, "Williamson, David E." <williamsonde@ornl.gov>, "Wayne T. Reiersen" <reiersen@pppl.gov>, "Cole, Michael" <colemj@ornl.gov>, "Goranson, Paul L." <goransonpl@ornl.gov>, "Lawrence E. Dudek" <ldudek@pppl.gov>, Phil Heitzenroeder <PHeitzenroeder@pppl.gov>, Hutch Neilson <hneilson@pppl.gov>, abrooks@pppl.gov, Steve Raftopoulos <sraftopo@pppl.gov>, "Michael E. Viola" <mviola@pppl.gov>, kd2@y12.doe.gov, mzarnstorff@pppl.gov, "James H. Chrzanowski" <jchrzanowski@pppl.gov>
Subject: Peer review of mod coil manipulation fixture

Folks


There will be a Peer review of the NCSX modular coil assembly fixture on Wednesday, February 16, at 1:30.Ê This is the fixture that is used to manipulate the 3-coil subassemblies over the vacuum vessel during field period assembly. ÊTom Brown will be holding a vendor information meeting later in the month.



The charge, committee, and invitees are listed below.



Please let Tom, Wayne, or me know if you cannot attend.



Thanks,



Brad



Charge:



1. Has the feasibility of a possible fixture design been demonstrated kinematically, ie, can a workable fixture be designed?



2. Are the design requirements sufficiently detailed to allow a vendor to build a suitable fixture?

 	Definition of required motion

	Mod coil handling point/load/cg definition

 	Seismic requirements

 	Safety requirements


3. Is there an adequate list of vendors?



Cog engineer: Tom Brown

Chair: Larry Dudek

RLM: Brad Nelson



Committee:

Mike Cole

Art Brooks

Dave Williamson

Mike Viola

Steve Raftopolous

Paul Goranson


Invitees:

Hutch Neilson

Phil Heitzenroeder

Kevin Freudenberg

Eric Perry

Mike Zarnstorff

Jim Chrzanowski


Brad Nelson

Oak Ridge National Laboratory
 P.O. Box 2008
 Oak Ridge, TN 37831-6169
nelsonbe@ornl.gov
 voice:Ê 865-574-1507
 fax: 865-576-7926