________________________________

From: Michael R. Kalish 
Sent: Friday, May 13, 2005 4:41 PM
To: Arthur W. Brooks; Frank A. Malinowski; Irving J. Zatz; Hutch Neilson; Jerry D. Levine; Judith A. Malsbury; James H. Chrzanowski; Wayne T. Reiersen
Cc: Joseph D. Rushinski; Rodney D. Templon
Subject: NCSX TF Conductor FDR

 

 

There will be an FDR Tuesday at 1:30 for the NCSX TF Coil Conductor.  The goal of the review is to verify that the specification, statement of work, and drawing are adequate and that the TF Coil design is advanced enough to release this documentation to procurement so that the conductor can be ordered.  The areas that will be addressed are:

 

*	Is the material specified correct?
*	Is the hole big enough?
*	Is the copper cross-section big enough?
*	Are the yield and ultimate specified for the conductor appropriate?

 

This is a review for only the raw conductor and should be relatively brief.

 

Thanks,

Mike

 

 

Michael Kalish
Princeton Plasma Physics Laboratory
PO Box 451    Princeton, NJ    08543
Phone: (609) 243-2277
Fax:   (609) 243-3248