From: Michael R. Kalish
Sent: Wednesday, July 13, 2005 9:45 AM
To: Bradley E. Nelson; Arthur W. Brooks; James H. Chrzanowski; Frank A.
Malinowski; Steve Raftopoulos
Cc: Hutch Neilson; Horng-Ming Fan; Fred Dahlgren; Geoffrey J.
Gettelfinger; Mike Cole; David E. Williamson;
leonard.myatt@myattconsulting.com; Freudenberg, Kevin D.; Wayne T.
Reiersen; Thomas G. Brown; Lawrence E. Dudek; Joseph D. Rushinski;
Marianne Tyrrell
Subject: TF Coil Wedge Casting FDR, Reminder

Attachments: se131-007.pdf; NCSX_CSPEC-131-03-dD TF Coil Wedge
Casting.doc; NCSX-SOW-131-02-dB TF Coil Wedge Castings.doc

Reminder…….. TF Coil Wedge Casting FDR  TODAY  at 1:00 in the Engineering Conference Room.  

The Specification, Statement of Work, and Drawings are attached.

 

Thanks,

Mike K.

 

 

 

Folks

 

There will be a Final Design Review for the TF coil wedge castings on Wednesday, July 13 at 1:00.  The particulars for the review are listed below:

 

Cog: Mike Kalish

 

Chair: Phil Heitzenroeder

 

RLM: Brad Nelson

 

Charge:

 

1.	Are the wedge casting SOW and technical specification (C-spec) complete and ready to issue? 
2.	Is the drawing package complete and ready for fabrication? 
3.	Are the wedge casting and associated TF assembly analyses complete and checked? 
4.	Is the design for integrating the wedge castings with the TF conductor sound and practical, including electrical insulation, bonding, fixturing? 
5.	Are the tolerances of the TF coil / wedge casing assembly achievable and adequate for final machine assembly? 

 

Committee:

 

Art Brooks

Jim Chrzanowski 

Frank Malinowski

Steve Raftopoulos

 

Invited

 

Hutch Neilson

HM Fan

Fred Dahlgren

Geoff Gettelfinger

Mike Cole

Dave Williamson

Len Myatt

Kevin Freudenberg

 

Wayne Reiersen, Tom Brown, and Larry Dudek are absent this week, but would otherwise be included as reviewers.  Please advise if you cannot attend.

 

Thanks,

 

Brad

 

 

Brad Nelson

Oak Ridge National Laboratory
P.O. Box 2008
Oak Ridge, TN 37831-6169
nelsonbe@ornl.gov
voice:  865-574-1507
fax: 865-576-7926