From: Wayne T. Reiersen
Sent: Thursday, June 28, 2007 11:14 AM
To: mjc@ornl.gov; xdw@ornl.gov; Kevin Freudenberg
(freudenbergk@ornl.gov); leonard.myatt@myattconsulting.com; Brad Nelson;
Paul Goranson (goransonpl@ornl.gov); fogartypj@ornl.gov; Phil
Heitzenroeder; Arthur W. Brooks; Horng-Ming Fan; Michael E. Viola;
Lawrence E. Dudek; Thomas G. Brown; Geoffrey J. Gettelfinger; John W.
Edwards; Michael J. Duco; Gary McGinnis; Thomas G. Brown
Cc: Hutch Neilson; Mike Williams; Jeffrey Makiel; Gregory Pitonak;
Ronald L. Strykowsky; Marianne Tyrrell; Michael C. Zarnstorff
Subject: Modular coil bolted joint FDR

A FDR for the bolted joints will be conducted on Friday, June 29 at 1:30pm.  PPPL participants will meet in the Engineering Conference Room.  Remote participants can dial in on 866.718.9081 pass code 706670.

 

Heitzenroeder, Brooks, Viola, and Dudek are asked to serve on the review committee.  I will chair the committee. The charge to the reviewers is as follows:

 

1.	Are the requirements well defined?  
2.	Does the design meet the requirements?  
3.	Is the design adequately underpinned by analysis and testing?
4.	Is the shim friction testing sufficient to proceed with procurement of coated shims? 
5.	Is the shim coating spec complete? 
6.	Are the drawings complete and ready to be released for fabrication? 
7.	Have all relevant chits from previous MC design reviews been adequately addressed? 

 

David Williamson is the cog engineer.  Brad Nelson is the RLM.