From: J. Stafiniak [jstafiniak@eversontesla.com] Sent: Wednesday, October 24, 2007 1:32 PM To: Michael R. Kalish Subject: FW: Follow Up Flag: Follow up Flag Status: Red Mike, The ground insulation on Coil 5 took 24 rolls of 1.5" tape. John -----Original Message----- From: J. Stafiniak [mailto:jstafiniak@eversontesla.com] Sent: Thursday, September 27, 2007 10:10 AM To: 'Michael R. Kalish' Subject: RE: Mike, The turn insulation takes 15 rolls of glass/coil and 4 rolls of kapton/coil. Ron will keep track of the ground insulation on coil 5. John -----Original Message----- From: Michael R. Kalish [mailto:mkalish@pppl.gov] Sent: Thursday, September 27, 2007 9:56 AM To: J. Stafiniak Cc: Phil Heitzenroeder; James H. Chrzanowski; Thomas G. Meighan; Irving J. Zatz Subject: John, FYI - Just to keep us on the same page ..here are my notes from yesterday: Discussed VPI: Teflon Tape will be used on fittings instead of LokTight John will add additional quantities of epoxy Extra care will be taken to ensure there are no leaks in fittings I will supply part number for the tool for stripping the diagnostic loop wire TF#3- Everson agrees to affect repair with half lap layer of wet glass then cryogenically test I will explore with management the possibility of receiving two coils per shipment Everson was temporarily on two shifts for winding but the future more permanent addition of a second shift is pending The inspection of the wedge dimensions at Atlas went well We need inventory of insulation used to verify quantities remaining are more than sufficient --- Visit Everson Tesla Inc. on the web at http://www.eversontesla.com This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. --- Outgoing mail is certified Virus Free. Scanned by Avast! anti-virus system (http://www.avast.com). Virus Database: 10/22/2007 ---