From: Michael R. Kalish
Sent: Friday, March 31, 2006 4:35 PM
To: Robert J. Delany
Cc: Erik D. Perry; Lawrence E. Dudek; Robert L. Horner
Subject: NCSX TF Coil Lead Spur Work Order

Attachments: se131-053-r0.pdf; se131-054-r0.pdf; se131-082-r0.pdf; se131-081-r0.pdf

Sir,



Here are the drawings for the NCSX TF Coil Lead Spurs. There are two different versions of lead spurs.  Each version has a flat pattern drawing and a final bent drawing.  We will require 19 of each.  Joe Rushinski can supply the Pro E Model output to Bob for the water jet cutting.  The material is already in house.  I’ll come down to the shop Monday with a work order and go over the job with you.  I’ve been over this with Bob and Vinnie back when we were just releasing the drawings so there shouldn’t be too many surprises.  Most of the work is for the water jet cutter, then limited machining, and a 45 degree bend.  We’ll probably go out of house to gun drill the cooling holes.



Charge # 9450 1*** 1351

Estimated Hours = 246 (including the holes)

Need date 5/19/06 (some flexibility here)



Thanks,

Mike



Michael Kalish
Princeton Plasma Physics Laboratory
PO Box 451    Princeton, NJ    08543
Phone: (609) 243-2277
Fax:   (609) 243-3248

You can visit the home page of the
Princeton Plasma Physics Laboratory at
http://www.pppl.gov