NCSX Web Pages  

NCSX FTP Sites  

Project FTP Server | Supplier FTP Server

Navigation Trail  

Engineering > Interface Control > ICDs > WBS 12 ICDs
   

Potential Interfaces

(WBS / WBS)

Lead Engineer

ICD #

Purpose

Status of Documenting Interfaces

WBS 12 Interfaces

     
12 to13 Goranson     Interfaces covered in top level model (SE-100-002)
121 to 142 Goranson

ICD-121-142-0001-00

Defines clearance requirements between the VVSA and Modular Coils & the radial buildups allotted to other VVSA external components  
12 to 14 to 3   ICD-12-14-3-0001-01 Defines the requirements for mounting the protective insulation between the VV and Modular Coils & the required clearances In signature cycle
12-15       Interfaces covered in top level model (SE-100-002)
125 to 171 to 4 to 5 Goranson ICD-125-171-4-5-0001-01 Defines the location and mounting provisions for the tube penetrations through the Cryostat  
12 to 18 Goranson   Metrology interfaces Metrology points defined by MTM as part of contract
12 to 21 to 23 Goranson     NOT IN MIE PROJECT, but port allocation drawing shows provisions for future addition
12 to 24 Goranson     NOT IN MIE PROJECT, but port allocation drawing shows provisions for future addition
12 to 25 Goranson     NOT IN MIE PROJECT, but port allocation drawing shows provisions for future addition
12 to 3 Goranson

ICD-12-3-0001-01

References the port locations,   allocations for diagnostics  & the Port maximum loads  
12 to 4 Goranson ICD-12-4-0001-00

Defines the VV grounding requirements and describes the interface connection to NCSX grounding system.

 
12 to 7 Goranson   Metrology interfaces Metrology points defined by MTM as part of contract
123  to 3 Stratton ICD-123-3-0001-00 Defines the initial requirements and design of the saddle loops  
123 to 4 to 5 Goranson ICD-123-4-5-0001-01 Defines the requirements for the resistance heaters and the interfaces.  
123 to 64 Goranson ICD-123-64-0001-01 Defines the operational parameters for the pressurized helium supplied by WBS 64 and defines the hookup requirements  

 

Privacy and Security Notice

Please forward comments and questions to the bsimmons@pppl.gov