From: Raymond A. Camp
Sent: Friday, July 22, 2005 4:06 PM
To: Hutch Neilson
Cc: Wayne T. Reiersen; jchrzano; Marianne Tyrrell
Subject: ACC Review of CWF Stations

Dear Dr. Neilson,

The NCSX ACC reviewed the readiness of stations #1A, #1B and #4 of the 
CWF on Tuesday, July 20.  Attending were J. Makeil (PG), L. Dietrich 
(PG), D. Mueller, R.Carnevale, J. Levine and myself.  We were hosted by 
J. Chrzanowski, and W. Reiersen.  Here are are recommendations:

Station #1B - Casting prep including metrology, cleaning and 
poloidal-break meggar testing.  Stud welding and cladding attachment by 
epoxy are also performed at this station.  The ACC recommends that the 
operating procedure and JHA be signed off prior to operation of this 
station.

Station #1A - Attaching the casting to the handling fixture ring and 
disassembly of the completed coil.  The ACC recommends that the 1/2 Ton 
hoist be verified ready by M. Viola, the Labs lift engineer, prior to 
operation.

Station #4 - This is the second coil winding station, with identical 
equipment to station #2.  The ACC recommends that, prior to operation, 
the walkway from the back exit be delineated by tape or paint to assure 
door clearance and a clear emergency exit route.

If you have any questions, please contact me.

Thank you.

Ray Camp
NCSX ACC Chairperson