NCSX Web Pages  

Project | Management | Physics | Procurement | Manufacturing

NCSX FTP Sites  

Project FTP Server | Supplier FTP Server

Navigation Trail  

Engineering > Design Reviews > WBS 14  Modular Coil Winding Pack
Review Title Modular Coil Winding Pack Peer Review
Date 19 March 2004
Cognizant Engineer Dave Williamson
Responsible Line Manager Brad Nelson
Review Board Chairperson Wayne Reiersen
Review Board Members J. Chrzanowski, M. Cole, A. Brooks, S. Raftopoulos
Invited Attendees H. Neilson, M. Zarnstorff, T. Brown, F. Dahlgren, HM Fan, K. Freudenberg, P. Fogarty
Other Attendees  

Are the winding pack components and configuration fully defined?

Does the winding pack as envisaged for the modular coils

1. match the winding plan and insulation materials envisioned by Jim Chrzanowski and PPPL    winding team?

1.       2. provide adequate performance?

3.       3. provide adequate shim thicknesses for maintaining the winding tolerances?

4.       4. provide adequate electrical insulation?

5.       5. provide enough allowance for the copper chill plates to meet cooling requirements?

Design Review Material



Chits and Project Disposition

Review Board Report
Items Reviewed

Sat Unsat


Appropriate requirements identified
Development plans and schedules Not applicable
Regulatory compliance including USQD and NEPA Not applicable
Disposition of CHITS from previous reviews Not applicable
Cost objectives Not applicable

Other review objectives addressed

(Attachment 4 of ENG-033)

Not applicable

Summary of Results

Acceptable pending resolution of concerns


(check  one)

 Acceptable pending resolution of concerns - CHITS identified above must be resolved prior to installation.
Incomplete - Additional work is required prior to another design review.

Cog Engineer Close-out

(check when done)


Privacy and Security Notice

Please forward comments and questions to the Webmaster