Review
Title |
TF Coil Wedge Casting FDR |
Date |
13 July 2005 |
Cognizant
Engineer |
Mike Kalish |
Responsible Line Manager |
Brad Nelson |
Review Board Chairperson |
Hutch Neilson |
Review Board Members |
Mike Cole, Jim Chrzanowski,
Frank Malinowski, Steve Raftopoulos |
Invitees |
Hutch Neilson, HM Fan, Fred
Dahlgren, Geoff Gettelfinger, Mike Cole, Dave Williamson, Len Myatt,
Kevin Freudenberg, Tom Brown |
Attendees |
Frank Malinowski, Steve
Raftopoulos, Brad Nelson, Mike Cole, Fred Dahlgren, Hutch Neilson, Bob
Simmons, Jeff Makiel, Joe Rushinski, Horng-Ming Fan, Irving Zatz, Greg
Pitonak, Brad Nelson, Mike Cole, Kevin Freudenberg, Dave Williamson, Tom
Brown, Irving Zatz, Greg Pitonak |
Charge |
1. Are the wedge casting
SOW and technical specification (C-spec) complete and ready to
issue? 2. Is
the drawing package complete and ready for fabrication?
3. Are the wedge
casting and associated TF assembly analyses complete and checked?
4. Is the design for
integrating the wedge castings with the TF conductor sound and
practical, including electrical insulation, bonding, fixturing?
5. Are the tolerances
of the TF coil/ wedge casting assembly achievable and adequate for
the final machine assembly? |
Design Review Material |
Announcement
Chits and Disposition Plan
Drawing
Presentation
C-Specification
Statement of Work
Design Review Report
|
Review Board Report |
|
Items Reviewed |
|
Sat |
Unsat |
Comments |
Appropriate requirements identified
|
|
|
|
Development plans and schedules |
|
|
|
Regulatory compliance including USQD and NEPA |
|
|
|
Disposition of CHITS from previous reviews |
|
|
|
Cost
objectives |
|
|
|
Other
review objectives addressed
(Attachment 4 of ENG-033) |
|
|
|
Summary of Results
|
|
Disposition
(check
one) |
1 Acceptable |
1
Acceptable pending resolution of concerns -
CHITS identified above must be resolved prior to installation. |
1 Incomplete -
Additional design
work is required prior to another design review.
|
Cog Engineer Close-out
(check
when done) |
|
1
Action required by Disposition is complete |