________________________________

From: Thomas G. Brown 
Sent: Thursday, August 11, 2005 6:19 PM
To: Wayne T. Reiersen; Hutch Neilson; Erik D. Perry; Lawrence E. Dudek; Jerry D. Levine; Fred Dahlgren; James H. Chrzanowski; Mike Cole; Bradley E. Nelson; David E. Williamson; 'Paul Goranson (goransonpl@ornl.gov)'; Michael E. Viola; Arthur W. Brooks; Steve Raftopoulos; Ronald L. Strykowsky; Frank A. Malinowski; Judith A. Malsbury; Gregory Pitonak; Jeffrey Makiel
Subject: Stage 3 - Crain assisted MC field period assembly Peer Review

 

 

 

A peer review has been organized to review the results of the MC assembly simulation using the D-site crane and make the decision to redirect the assembly design approach.  The meeting will be held Friday (August 12) at 10 AM in the engineering conference room.  

 

ORNL: please call into 866-718-9081 and use passcode 706670.

 

View graphs are attached.

 

RLM: Brad Nelson

 

Chair: Larry Dudek

 

Committee:

Mike Cole

Mike Viola

Art Brooks

Jim Chrzanowski

Steve Raftopoulos

 

Charge:

 

1.          Does the block test simulation adequately predict the ability to successfully move the MC over the VV within the installation tolerances?

 

 2   Can the laser screens be fabricated and adequately located within some specified tolerances to properly define the path of motion? Is there a better approach?

 

 3   If the MC is moved in some manner that places it off the required path, is there a method to find where it is, then retract and reposition it to be on the correct path?

 

4    Technicians are required to stabilize the MC (in close proximity to it) while it is supported by the crane.  Are there any safety issues that need to be addressed prior to making this decision?

 

5    Is there additional work or documentation that should be done prior to making this decision?