From: Wayne T. Reiersen
Sent: Wednesday, December 07, 2005 11:23 AM
To: Judith A. Malsbury; Jerry D. Levine; Jeffrey Makiel; Gregory
Pitonak; Mike Williams; John W. Edwards
Cc: George W. Labik; Marianne Tyrrell
Subject: FW: NCSX_External Saddle Loops_FDR for Template Fabrication

FYI

		_____________________________________________
		From: George W. Labik 
		Sent: Wednesday, December 07, 2005 10:48 AM
		To: Thomas G. Brown; 'Mike Cole'; Lawrence E. Dudek; Thomas E. Egebo; Eric D. Fredrickson; Geoffrey J. Gettelfinger; 'Paul Goranson'; Lawrence J. Guttadora; David W. Johnson; Ed Lazarus; Frank A. Malinowski; Jonathan E. Menard; Hutch Neilson; Bradley E. Nelson; Neil Pomphrey; Steve Raftopoulos; Wayne T. Reiersen; Brentley C. Stratton; Michael E. Viola; Michael C. Zarnstorff
		Subject: FW: NCSX_External Saddle Loops_FDR for Template Fabrication



		Please attend a FDR scheduled for 1:30 December 13, 2005 in the Engineering Conference Room.  The review will be limited to reviewing only the completed loop flat development drawings. This will enable PPPL to pursue a fabrication of the loop templates.  

		The loop layouts, twisted pair leads and heating / cooling tubes are critical ingredients of a complete model demonstrating sufficient clearance between the various components. However, this model will not be ready for the 13th and will be reviewed separately at a later date. The model is required input to determine and resolve interferences but does not impact the template geometries.


		The loops high density configuration was changed to a more distributed one over the three vessel periods. The new distribution provides for broader physics measurements and more space for the twisted leads.