From: Arthur W. Brooks
Sent: Monday, February 11, 2008 9:08 AM
To: Michael C. Zarnstorff
Cc: Phil Heitzenroeder; Thomas G. Brown
Subject: RE: winding form tolerances

Attachments: MTM Casting Measurement Summary.xls

Mike,

Attached is a summary of the MTM Verisurf data for most of the Coils (for C1 and C2, the 
first coils wound, data is missing, or available only in a different form). This is from 
the data posted in Tom's area on the P drive: "P:\departments\NCSX\Construction 
Info\Dimensional_Control_ Metrology\CAD_Model_Data\MC matrology data - CAD input"

The max deviation was .048" for C3. After that, the max deviation dropped to 0.038".

Art

-----Original Message-----
From: Michael C. Zarnstorff 
Sent: Monday, February 11, 2008 1:59 AM
To: Arthur W. Brooks; Thomas G. Brown
Cc: Phil Heitzenroeder
Subject: winding form tolerances

Art and Tom,

What was the range of deviations that we actually accepted in the winding 
surfaces of the modular coils winding forms, as delivered?

We initially specified that the winding surfaces of the winding forms 
should be machined to a +/- 0.010 tolerance, as I recall.  Subsequent to 
the specification, we developed ways to recover from larger deviations.  As 
I recall, we then accepted deviations larger than the original 
specification...is this correct?

thanks.
Mike.