From: Subrahmanya Ramakrishnan
Sent: Tuesday, February 19, 2008 3:39 PM
To: Thomas G. Brown
Cc: Phil Heitzenroeder; Arthur W. Brooks
Subject: NCSX leads

Attachments: burndy connector.pdf

Tom
WBS4 proposes to bring the cable leads right up to the hot side of the Cold/Hot box you are designing. Provision has to be made in the box to accept the cable lugs Burndy YA442N - See attached for dimensional details. Thus copper pads with the required hole pattern have to be provided (Two 1/2" dia holes with 1 3/4" between hole centers). In case of Modular coils there will be two cables per pole. For all other coils there will be one cable per pole.
Thanks
Raki