Attached is an iges files of the PPPL weld on fiducial points that were used to align to the vessel during metrology of the various loops.  They have been averaged and a bundle report is included.  The “nominal” fiducial points are included on a separate layer including some points not used in our normal alignments.  These are the weld on fiducially barrels ~1” off surface plus the 1.5” reflector in the nest which adds an additional inch,  so these points should be about 2” off the surface.  In any case we will be using the same probe geometry so the points can stay as is.  Please check the coordinate system, I believe the axises are switched!

 

-Craig