From: Hutch Neilson
Sent: Tuesday, November 20, 2007 9:57 PM
To: Michael R. Kalish
Cc: Michael C. Zarnstorff; Phil Heitzenroeder; Subrahmanya Ramakrishnan;
Arthur W. Brooks; Thomas G. Brown
Subject: Trim Coil requirements

Mike,

Following up on the recent peer review, here is the requested  
guidance regarding trim coil requirements:

1.  Response time / voltage:  zero to 20 kA-turn in 20 ms.   
(Strawman)  Please advise on the voltage and force implications  
before going too far with this.
2.   Dimensional accuracy:  Fabrication tolerance: ±1/4 in.;   
Positioning tolerance: ±1/2 in.   Record as-built dimensions.
3.   Midplane coils:  examine the feasibility of adding two coils  
straddling the midplane at the C-C joints.  One coil on each side of  
the joint.

Hutch