From: Brentley C. Stratton
Sent: Friday, March 04, 2005 4:48 PM
To: Michael C. Zarnstorff; Paul J. Fogarty; Mike Cole; Wayne T.
Reiersen; Steve Raftopoulos; Arthur W. Brooks; James H. Chrzanowski;
David E. Williamson; fsanders@wisc.edu; Phil Heitzenroeder; Hutch
Neilson
Subject: Near-term TRC plan based on today's meeting

Folks,

Thank you for a good meeting today. Based on our discussion, my 
understanding of the near-term plan for the TRC is:

1. This weekend: finish preparations for winding side A, i. e., 
complete setting side clamps and set the leads.

2. First shift Monday: wind turn 1 of side A and then stop.

3. Monday as soon as turn 1 is done: measure turn 1 of side A.

4. Monday: adjust clamps on side B while measuring with the Romer arm 
to attempt to achieve the desired dimensions of the conductor pack. 
Re-measure side B winding pack when done. No winding of side A will 
take place while this is happening.

5. First shift Tuesday and beyond: continue winding side A. Stop for 
measurements of winding pack after turns 5 and 10 are done.

Brent