NCSX Procurement Update of 10/05/05

• The C-1 winding form (MCWF#1) was shipped to PPPL after intensive review of the inspection data by PPPL & ORNL engineers, teleconference meetings with EIO & Major Tool,  and finally release for shipment. The part arrived on Monday, Oct. 3.  Documentation review and disposition of NCR’s is still in progress. Formal acceptance will follow once these are complete.
  

• The C-2 casting (MCWF#2) is in 5-axis machining operations. An updated delivery forecast for the C-2 and subsequent winding forms will be available next week.
  

• The C-3 casting (MCWF#4) has begun rough machining operations on one of MTM’s 3-axis machines.
  

• The C-4 (MCWF#5) is still undergoing weld upgrades at MetalTek.
  

• The C-5 (MCWF#6) is ready to start weld upgrades as soon as the C-4 is complete.
  

• The C-6 (MCWF#7) should now be out for its first radiographic testing this week (not last week, as previously reported.)
  

• The A-2 (MCWF#8) casting was broken out of the mold over the weekend. Lawton personnel participated in the molding operations as part of the investigation of the thin-wall issue. Preliminary caliper measurements indicate adequate wall thickness on the A-2. Detailed measurements will follow.
  

• The Type B pattern is at MetalTek.
  

• The port holes on the first 120 degree segment are being inspected with the Romer arm in preparation for installing the ports.
  

• The vertical ports and other large ports are being welded.
  

• The 3rd 60 degree segment is complete and mounted on the 120-degree fixture for joining with the 4th segment, which is being trimmed in preparation.
  

• Assembly and welding for the 5th 60 degree segment have begun.