Major Tool & Machine, Inc.
Page: 1
 1458 East 19th Street
MTM N/C: 19321
Date: 02/27/06
 Indianapolis, IN 46218-4289
User ID: GRIFFITH

ENERGY INDUSTRIES OF OHIO
Customer:
Telephone:
216-496-2314
Contact:
NANCY HORTON
NKHFlowen@aol.com
E-Mail:
216-328-2001
Fax:

S005242-F/Ln:4
Customer P.O.:
SE141-116 / MODULAR COIL WINDING FORM TYPE
Part:
C4
Serial No./Qty:
8
Revision:
SE141-116
Drawing ID:

317-636-6433
Telephone:
MIKE GRIFFITH
Reported By:
Fax:
317-634-9420
E-Mail:
mGriffith@MajorTool.com

Problem:
There is a tool gouge in the T-section of the Datum E side.  The gouge is along the short leg of the L in the location
where the .5" VPI bleed hole intersects the T-section (zone F3 on sheet 9 of the drawing).
The gouge is approximately 12" in length and approximately .05" in depth.  The width and location of the gouge
varies along the surface.  See attached pictures for further details.

Proposed Disposition:
Welding of the gouge will likely result in considerable movement of the thin section of the T.  Since the opposite
side of the T has been finished machine, Major Tool proposes a use-as-is.

  4
Number of additional pages: 

Customer Disposition:       [   ] Use As Is          [  ] Rework          [  ] Repair          [  ] Scrap          [  ] Replace

Date:
Title:
Technical Contact Approval: 

Date:
Title:
Buyer Approval: 

Title:
Date:

Major Tool Implemented By:

n:\mtmapps\Mtnonc14.qrp

Major Tool and Machine, Inc.  1458 East 19th Street, Indianapolis, IN 46218-4289  Tel: 317-636-6433  Fax: 317-634-9420