From: Michael E. Viola
Sent: Friday, February 09, 2007 1:09 PM
To: Wayne T. Reiersen; Phil Heitzenroeder; Arthur W. Brooks; Thomas G.
Brown; David E. Williamson; 'Cole, Michael'
Subject: FW: Dimensions for Stellalloy samples

 
Here is the Stellalloy data.

The 2 coupons were small pieces roughly 3" x 3" x 1" thick
The cylinder was roughly 3" diameter and 12" long
We machined flat parallel surfaces on the pieces to get accurate measurements with a caliper.

Thanks,
Mike Viola, PPPL, (609) 243 3655


-----Original Message-----
From: Edward G. Bush 
Sent: Friday, February 09, 2007 12:42 PM
To: Michael E. Viola
Cc: John W. Edwards
Subject: Dimensions for Stellalloy samples


Subject: Three Stellalloy Samples

Mike,

Here are the dimensions you requested

			X Dim.	Y Dim.

Coupon marked Z2	2.801"	.923"  at room temperature
			2.791"	.920"  after 3 minutes in liquid nitrogen

Coupon marked ZC	2.940"	.946"  at room temperature
			2.929"	.941	 after 3 minutes in liquid nitrogen

Cylinder	  	12.001"		at room temperature
			11.970"		after 24 minutes in liquid nitrogen

The samples are located in the NBPC Area at D-Site.  If you would like them located to a different, just let me know.



Page me at %231 if there are any questions

Ed Bush