From: J. Chrzanowski [jchrzano@pppl.gov]
Sent: Thursday, July 17, 2003 4:38 PM
To: abrooks@pppl.gov; wreiersen@pppl.gov; pheitzen@pppl.gov; nelsonbe@ornl.gov; williams@pppl.gov
Cc: tmeighan@pppl.gov; sraftopoulos@pppl.gov
Subject: Keystone Data
Art

Attached is the keystone data for the 0.539" x 0.660 " twisted conductor wound that was wound onto a 5 inch diameter core.  Conductor was insulated and wound in both the easy (first table) and hard directions (second table).

The numbers shown in the table are averages for the data collected. 
Column No. 1:  The turn number
Column No. 3: The theoretical radial build  from the winding face based upon the average conductor measurements made pre-winding.
Column No. 4:  Actual radial build measurements. 
Column No. 5: The actual inside winding radius for each turn, building onto the previous turn. 
Column No. 6: The average height of the conductor pre-winding. 
Column No. 7:  The actual height measurements after winding.

I will be out on Friday, but will return on Monday if you have any questions.

Jim