From: Griffith, Mike [mgriffith@majortool.com]
Sent: Wednesday, April 12, 2006 10:32 AM
To: Bob Simmons
Cc: Phil Heitzenroeder; NKHFlowen@aol.com; Bowling, Kevin
Subject: RE: Clarification on Which MCWFs will Have the Proposed Lifting
Holes

Bob,

The lifting holes would be incorporated into C6 and all of the A and B shims.  C5 is beyond this.  Thanks.

 

________________________________

From: Bob Simmons [mailto:bsimmons@pppl.gov] 
Sent: Thursday, April 06, 2006 4:11 PM
To: Griffith, Mike
Cc: Phil Heitzenroeder; NKHFlowen@aol.com
Subject: Clarification on Which MCWFs will Have the Proposed Lifting Holes

 

Hi Mike,

 

Phil may have already contacted you, but before we finalize the attached draft RFD-14-019, we need to make sure which MCWFs will have the lifting holes.  We already know that C1 thru C4 did not, but am not sure whether C5 and later ones will have the holes. Until we get this clarification, we cannot proceed with this RFD.

 

Please advise.

 

Thanks,

 

Bob S.

 

Bob Simmons

NCSX Systems Engineering Support Manager

Princeton Plasma Physics Laboratory (PPPL)

Tel #: (609) 243-2766

Fax #: (609) 243-3030