| Review
Title |
Vacuum Vessel Thermal
Insulation FDR |
| Date |
31 May 2006 |
| Cognizant
Engineer |
Paul Goranson |
|
Responsible Line Manager |
Brad Nelson |
|
Review Board Chairperson |
Larry Dudek |
|
Review Board Members |
Larry Dudek, Tom Brown,
Hutch Neilson, Mike Zarnstorff, Brad Nelson |
|
Invitees |
Frank Malinowski, Mike Cole,
Mike Viola, Geoff Gettelfinger, Wayne Reiersen |
|
Attendees |
|
|
Charge |
| 1. |
Does the insulation
and boot seal design meet all performance requirements, and have all
safety issues associated with the loose fill insulation been
addressed? |
| 2. |
Do the insulation,
and boots satisfy envelope requirements? Are they compatible
with the MC shell, cooling tubes, magnetic loops, mounting hardware,
etc.? Can the insulation and boots be readily installed? |
| 3. |
Have potential
failure modes been adequately addressed in the design? |
| 4. |
Is the design
documentation required to procure, fabricate, and install the
insulation and boots adequate? |
|
|
Design Review Material |
Announcement
Chits and Disposition
Review Committee Report
|
|
Review Board Report |
 |
|
Items Reviewed |
|
Sat |
Unsat |
Comments |
|
Appropriate requirements identified
|
|
|
|
|
Development plans and schedules |
|
|
|
|
Regulatory compliance including USQD and NEPA |
|
|
|
|
Disposition of CHITS from previous reviews |
|
|
|
|
Cost
objectives |
|
|
|
|
Other
review objectives addressed
(Attachment 4 of ENG-033) |
|
|
|
|
Summary of Results
|
|
|
Disposition
(check
one) |
1 Acceptable |
|
1 Acceptable pending resolution of concerns -
CHITS identified above must be resolved prior to installation. |
|
1 Incomplete -
Additional design
work is required prior to another design review.
|
|
Cog Engineer Close-out
(check
when done) |
|
|
1
Action required by Disposition is complete |
