NCSX Web Pages  

Project | Management | Physics | Procurement | Manufacturing

NCSX FTP Sites  

Project FTP Server | Supplier FTP Server

Navigation Trail  

Engineering > Analysis Reports > WBS 18

Analysis reports are filed by Document Number.  Please click on the appropriate Document Number below to view the analysis report.  Peer review documentation is filed in the right-most column.


Click here for guidelines for documenting analyses.


Document Number


Purpose Status

Peer Review

WBS 18 - Field Period Assy        
NCSX-CALC-18-001-00 Follow-up Analysis performed on the  FPA Station 3 following its FDR FEA analysis of the Station 3 vacuum vessel assembly fixture support was performed to verify the adequacy of the design in supporting a vessel against an external lateral load of 1000 lbs. Appv'd 8/3/2007  
NCSX-CALC-18-002-00 Analysis performed on the FPA Station 3 lift fixture for its FDR

Hand calculations and FEA analysis of the lift fixture was performed to verify the adequacy of the design in supporting the weight of the module coil half period (MCHP) as it is maneuvered over the vacuum vessel.

Appv'd 12/10/2007  

Structural Design Analysis Report - Station 3 Lift Fixture

The objective of this analysis was to validate the design adequacy of the station 3 lift  fixture by estimating the stress distribution and determining the design safety factors.

Appv'd 5/19/2008  
WBS 186 - Tooling & Fixtures        
NCSX-CALC-186-001-00 VV Assembly Fixture Structural Analysis Establishes structural margins for using the VV Assembly Fixture Appv'd 10/11/2005  

Privacy and Security Notice

Please forward comments and questions to the Webmaster